Property & Home

Solar Panel Sizing Calculator

Convert annual electricity use and user-entered solar-resource assumptions into a transparent preliminary array size.

View Property & Home

Energy-use and system assumptions stay in your browser.

Your scenario

Estimate a solar array size

Local calculation
Use a recent full year of bills.
100% targets annual generation equal to annual use.
Use a reputable location-specific solar resource.
Editable allowance for soiling, shading, wiring and availability.
Whole-watt panel rating.

Estimate

Estimated panel count

18

Calculation breakdown

Target annual generation
10,000 kWh
Required unrounded system
7.079 kW
Installed nameplate after whole-panel rounding
7.2 kW
Estimated annual production
10,170.36 kWh
Estimated annual usage offset
101.7%

Assumptions and limitations

  • Required kW = target annual generation ÷ (peak sun hours × 365 × one minus system loss). Panels round up to the next whole panel.
  • The 14% example loss follows the editable loss concept documented by NREL PVWatts; it is not a universal default for every site.
  • Roof area, orientation, local irradiance, shading, clipping, electrical limits, storage and permits require a qualified site design.

Privacy: all values stay in this browser. No account, API, upload, storage or input tracking is used.

What this tool does

Estimates preliminary solar nameplate capacity and panel count.

How to use it

  • Enter annual electricity use and target offset.
  • Enter location-specific peak sun hours and losses.
  • Choose a panel rating and review the rounded array.

Example input and output

Input: 10,000 kWh use with 100% target offset

Output: Required kW, panel count and estimated production

Common use cases

  • Early solar planning
  • Comparing panel ratings
  • Testing loss and solar-resource assumptions

FAQ

What are peak sun hours?

A location-specific equivalent-hours measure of daily solar energy, not ordinary daylight hours.

Why are panels rounded up?

A real array uses whole panels, so the nameplate size can exceed the unrounded requirement.

Is 14% loss universal?

No. It is an editable example based on the PVWatts loss concept.

Is this an installer design?

No. Roof, electrical, structural and permitting constraints require qualified assessment.